How to Create a Report Using Micro-Scope Version 14From the main menu select option 2 or 4.
From the main menu select option 2 or 4.n order to create a report you will need to run the test from the Batch Menu. Select the test you will run.


Set the pass count for the selected test

After running the test, go to Report Features and select Create Report to introduce your company information
and client as well.

Then select Log Report and form there select Log to Disk.
Write the correct path for the floppy drive with the name
of the file.
i.e. B:Test1.txt.
Note that we use drive B even when there is only one
floppy drive present. This is because MicroScope emulates
drive A to load all its variables.

The report will have all general information of the PC.
This is very important since you will get the serial number from
the motherboard, hard drives and also information such as
Processor details, BIOS name, version and date.

At the end of the report you will be able to see the results of
the test and the test performed as well.
For a more detail information of the test you will have to repeat
the test for the device that fails using the diagnostic menu.

These are the details for the Motherboard test using Diagnostic option.